yanghm's blog

The proper use of the potato digger cropper has a great influence on the quality of the machine and the life of the machine. Every hand should pay enough attention, especially when it is planted in spring, it is more important to reduce the use. To improve the efficiency of production, we can effectively guarantee the safety of production. Here is a brief introduction to the correct operation of the potato digger cropper.

Farming machine potato digger cropper mounted agriculture tractor boarded the correct operation method of agricultural tractor

1. Before starting the potato excavator, it must be debugged and inspected first. Check whether the various protective measures are perfect, remove the oil on the machine, and fill the lubricating parts with grease.

2. Check that the link parts of each part are strong.

3. Check that the seeds and fertilizers should not be mixed with stones and nails. The fertilizer should not be agglomerated.

4. Turn the pulley to carefully observe the presence or absence of collision and friction.

5. Check the hobbing condition of the hobbing, whether there are open welding and missing teeth.

6. Check the imitation mechanism, mainly to see the rotation of the ground wheel, whether the seed tray and the discharge disc meet the requirements, and whether the angle of the slab meets the requirements.

7. A comprehensive adjustment is required before the machine is operated.

8. Adjust the seeding rate of the machine, and the seeding quantity of each seed meter should be consistent.

9. Check the tightness of the gear to see if there are open and missing teeth.

10. Before the potato digger cropper is officially operated, it is necessary to set the seeding amount and the line spacing of the opener according to the specifications of the manual and the agronomic requirements. When working, the machine should pay attention to the straight line running at a constant speed. Do not flicker and avoid a replay.


Introduction of the characteristics of Vegetable Seed Planting Machine for Tractor Mounted

The vegetable planting machine is suitable for sowing millet, vegetables, and sorghum in straw returning machine. It can complete the processes of flat land, ditching, sowing, fertilizing, repressing, covering soil and mullion in one operation. The new generation no-till opener is produced by the advanced technology of manganese steel quenching. It has high hardness, high strength, good sailing performance, and has a scraping device, which can work well in clay. The erecting device can be adjusted up and down, left and right, and can be built or filled with a ditch. It is not necessary to stop the car when it is adjusted, and it is within reach.

Applicable crops for Vegetable Seed Planting Machine for Tractor Mounted

When using a Vegetable Seed Planting Machine, users can use to sow millet, sesame, mustard, rapeseed, oilseed, rapeseed, flax, pepper, beet, white radish, radish, carrot, spinach, leeks, green onions, onions, cabbage , celery, mustard, hemp, green shoots, cabbage, asparagus, sunflower, lettuce, snow red, broccoli and other flowers, alfalfa grass, lawn, grain and oil, Chinese herbal medicines, vegetables and other small particles Interplanting, planting, strong seedlings, increasing yield, and efficient sowing.


CNC tool grinder technology and equipment is a high-precision machining technology and equipment urgently needed in China's aerospace, cutting tools, measuring tools, machine tool manufacturing and other precision machinery industries. At present, only foreign companies can produce, which is an important guarantee for the manufacturing precision of foreign manufacturing. However, the research and application in this field in China is still very backward, which seriously affects the improvement of manufacturing precision in China.

CNC tool grinder machine develops high-precision CNC composite grinding technology and equipment with high precision and high-precision machine tool. It realizes high-precision machine tool spindle, high-speed tool holder, precision mold parts, outer circle, inner hole, outer curved surface, and the end surface. High-precision composite grinding of card slots, tapered surfaces, non-circular and threaded parts, the overall technical level has reached the level of similar foreign products.

 Development of process and functional components for internal bore, outer circle, outer curved surface, end face, card slot, taper, non-circular and thread grinding on one machine; development of menu-based general grinding software to simplify grinding operations Process; develop CNC turret type multi-wheel exchange parts to realize multi-station and multi-machining compound precision grinding; carry out multi-axis linkage precision positioning by domestic CNC system and servo direct drive system and compare and evaluate with foreign systems.

 BT-150D CNC tool grinder Characteristics:

 1. Develop and apply the multi-wheel multi-station rotary device to complete high-precision composite grinding of inner hole, outer circle, outer curved surface, end face, card slot, taper surface, non-circular and thread in one clamping of the workpiece. It avoids repeated installation errors and improves machining efficiency and machining accuracy.

 2. Four-axis tool grinding center application of torque motor direct drive high-precision static pressure spindle system to achieve high precision internal and external cylindrical grinding.

 3. Develop menu-based general grinding software, which greatly simplifies the grinding process.

 4. Develop domestic high-performance grinding CNC system and direct drive module to realize multi-axis linkage precision positioning and non-circular grinding.


Rice Milling Equipment Paddy Milling Machine is easy to operate and small in size. It combines air separation to separate kernel and seed coat, which greatly reduces the breaking rate and improves the peeling quality and yield. It is mainly used to process corn and wheat. Whole grains such as barley, as well as peeling and processing of rice and sorghum,  peeled rice, especially the corn has been removed from the hard hull and germ parts, improving the taste of corn, expanding the application range of corn, peeling After corn milling, corn noodles are very popular. Below is the China Electric Rice Milling Equipment Paddy Milling Machine Supplier to give you a brief introduction to the equipment.

The rice milling machine is designed on the basis of the C1 combined corn peeling and smashing machine. A new wind filter system, a strapless crushing system, a current display system, an automatic adjustment system for the discharge port, and wet stripping have been added to produce seven varieties of finished corn bran. It is suitable for the peeling, breaking and wind-selecting of raw materials such as wheat, rice, corn and sorghum in small and medium-sized grain and rice processing plants. The finished products processed by the corn peeling and smashing machine can directly enter the supermarket and the grain and oil wholesale market.

The new rice is milled with new rice, which is healthier to eat, naturally non-polluting, and ready to use. Keep away from the dangers of mildew polished rice and fresh rice. The machine lighting

Electric power, food store, workshop, home users are convenient to use, Aike brand small rice mill most notable features: spray, suction device, can be realized

Rice, alfalfa and broken rice are separated on their own, and the finished product is white and smooth, and the broken rice rate is low. At the same time, it has less power consumption, large output, and shape.

Beautiful, compact structure, small footprint, convenient operation and maintenance, multi-purpose machine. Equipment structure: China Electric Rice Milling Equipment Paddy Milling Machine is mainly composed of four parts: rice mill, pulverizer, motor, and frame. The rice milling machine is mainly composed of cover, middle seat, machine base, rice roll, rice sieve, Rice knife, feed half, slide screen, pulley

Adjust the device composition. The pulverizer is mainly composed of a feed half, a pulverizer housing, a discharge hopper and the like.


Many users face numerous manufacturers and equipment models on the market when they first purchase corn harvester equipment and do not know how to choose. If you want to buy the right equipment, you must first consider the regional adaptability of the equipment, and then make a choice. Below is the China Knapsack Corn Automatic Corn Harvester manufacturer to introduce the factors to be considered in the regional adaptability.

1. As we all know, most of the corn harvesters produced at home and abroad require “grain harvesting”, and the corn planting distance varies widely across China, even if the corn grown in a natural village has different spacing. Therefore, a corn combine harvester with a homing function is one of the user's choices.

2. China's corn planting areas are long and scattered, and the natural conditions are very different, resulting in different varieties of corn and different agronomic techniques. Therefore, the growth and yield of corn are obviously divided into different regions of the two-year district and the one-year district. In the two-year area, the yield is low, the plant has short ears and small stems, and the straw is fine. The yield per year is high, the plant has high ear size, the straw is thick, and the planting is mostly ridge. Therefore, the height of the picking table needs to be considered. The adjustable method and convenience, the design strength of the picking table and the strength of the material, the manufacturing strength and the durability of the product.

3. Two seasons in the two seasons, three autumn seasons for the timely rush to plant winter wheat, most of the corn in the straw green, grain harvested fruit harvest period. In this way, no matter whether the corn has a broken stem rate and a low rate of dropping, it is not necessary to consider installing and using a waste device. In the first year of the year, the corn is fully ripened at the time of harvest, the ear is dropping, the leaves of the straw are crisp, the rate of broken stems is high, and the mixed leaves in the ear box are severe. The corn harvester with clearing and sorting function should be selected.

4. The current rural-to-household management system in rural China, with land division and planting, generally has a small plot area, narrow field auxiliary roads, and difficult land access. When using mechanized harvesting corn, the choice can be harvested or harvested. It is very important to have a corn harvester model that is allowed to enter the field at any position in the field and to open the auxiliary working channel by itself. At present, the alternative models are mostly China Knapsack Corn Automatic Corn Harvester. In order to realize the self-opening harvesting channel, the type of the picking table should be larger or equal to the width of the tractor.


Peanut picking machine is used for picking fruit with vines after harvesting. It can be used flexibly in the field, the fruit is clean, the fruit shell has low breakage rate, less loss, dry and wet stems are available, work efficiency is high, and threshing is clean, so many now The user will choose the peanut picker for picking when harvesting peanuts. However, we must know that when we purchase equipment, we must not only value the Peanut Picker Machine price but also have a certain understanding of the various performances and characteristics of the equipment. Let us briefly introduce them to you.

Peanut picking machine features:

The equipment has the advantages of high extraction rate, low breakage rate, clean and clean, high work efficiency, reasonable structure of the whole machine and convenient movement between sites.

Peanut picking machine construction:

The equipment mainly consists of a frame, an electric motor, a transmission part, a picking-out part, a fan selection part, a fan selection part, and a vibration mechanism. During the operation, the motor or diesel engine drives the machine to run through the feeding inlet or the automatic feeding platform to enter the fruit picking system. The roller picking rod rotates to break the peanuts out of the stem, and the fruit and debris fall through the gravure hole onto the vibrating screen. The discharge port is discharged, and the fruit scattered on the vibrating screen is transmitted to the fan suction port through the vibrating screen, and the clean fruit is selected to complete the whole process.

Peanut picking machine parameter description:

Weight: 150Kg

Supporting power: motor 5.5-7.5KW, walking tractor diesel engine 12

Spindle speed: 600700r/min

Working efficiency: 4--8 mu/h

Picking rate: >99 Breaking rate: <1 Miscellaneous rate: <1

Machine size: 215*152*143cm, delivery size: 110*100*154cm


The corn harvester installed by the tractor is very popular among farmers. It is multi-purpose, light and flexible, and frees people from heavy labor. It has high work efficiency, saves users' manpower and material resources, and brings great convenience to users. . The Tractor Mounted Corn Harvester manufacturer introduces the precautions for the use of the harvester to ensure the safety of the operator.

Tractor Mounted Corn Harvester operation:

1. The corn harvester should enter the ground at a low forward speed, but the engine must reach the normal operating speed before the harvest begins, so that the threshing machine runs at full speed. Before the self-propelled harvester enters the ground, the working gear should be selected, and the stepless speed should be reduced to the minimum speed. When the forward speed is increased, try to achieve the stepless speed change, and avoid changing the gear position. When receiving the ground, slowly raise the header and reduce the forward speed and turn, but the throttle should not be reduced to avoid blockage of the barrel.

two. Adjustment of the corn harvester. In the harvesting process, the corn harvester should adjust the threshing gap, the front and rear position and height of the reel, etc. according to the corn yield, dryness and wetness, natural height and lodging condition at any time; and the piggyback harvester Adjustments should be made before entering the ground.

three. Choose a large throttle operation. Corn harvesters should be operated with maximum efficiency. At the time of harvesting, the throttle should always be operated. It is not allowed to reduce the speed of the throttle to reduce the speed of the drum, which will reduce the drum speed, resulting in lower work quality and even block the drum.

four. The choice of job position. During the harvesting process, the corn harvester installed by the tractor should select a reasonable working position according to factors such as wheat yield, natural height, dryness and wetness.

Fives. The choice of the width of the work. Under normal circumstances, the combine harvester should be full of operations, but when the corn production is too high or the humidity is too high, when the minimum operation is still overloaded, the cutting width should be reduced, and the general cutting width can be reduced to 80% to meet the requirements. .

six. Harvest of dry crops. When the corn has matured and passed the suitable harvesting period, it is easy to fall off during harvesting. The speed of the reel should be appropriately lowered to prevent the loss of grain loss caused by the reeling of the reel and reduce the speed of the operation. It can also be arranged in the morning. Or harvest in the evening.


When harvesting peanuts, the traditional artificial harvesting method has a large workload and low efficiency. The Peanut Picker Machine can easily complete the peanut picking work, which is welcomed by many industries. So how does it do it?The reason why the Peanut Picker Machine can easily peel the shell is mainly related to its working principle. When the shelling begins, the peanuts are fed into the coarse grid, and the inside of the sheller passes through the force between the rotating plate and the fixed concave plate, and the peanut shell and the peanut seed are separated, and simultaneously pass through the grid. The net fell. At this time, although the shell and the nuts are separated, they are still mixed together. Peanut picking machine equipment is not only efficient, but the Peanut Picker Machine price on the market is also relatively cheap and can meet the needs of most users.The Peanut Picker Machine uses the difference between the weight of the peanut shell and the peanut seed at work, and the majority of the peanut shell is blown out of the machine by the wind through the wind tunnel. In order to avoid some peanuts not being shelled, the equipment was designed with heavy separation screen and secondary shelling, and finally achieved complete stripping.This way of Peanut Picker Machine makes work efficiency and shelling clean. Aike Machinery Co., Ltd. has long been supplying peanut picking machine and peanut peeling machine. Welcome to come for free consultation.


I believe that many people who have used Rice and Wheat Thresher will encounter such problems. The threshing machine is blocked. In fact, it can prevent such problems. Below, Aike Machinery explains how to prevent the clogging of the thresher.

Newly Designed Model 125 Large Rice and Wheat Thresher jam problem

The front hopper of the rice and wheat thresher is too close to the ground, causing the large angle iron to scrape. The clutch is too loose, and the clutch U-shaped card can be loosened a few times. If the corn thresher does not rotate, check if the clutch is too loose, adjust the clutch lever to make the clutch tight.

Chain: The two sprocket wheels do not collide and the chain is too loose. Large belt deviation: adjust the two sides of the scorpion under the front hopper, the upper belt is deflected, and the left side of the conveyor is adjusted.

The belt is too loose, adjust the dice up and reinstall the belt. The problem of blockage of rice and wheat thresher, I think every problem that will be encountered when purchasing a Rice and Wheat Thresher is mostly due to the neglect of the dynamic and static balance of the drum when manufacturing or repairing the drum, causing the part to be stressed when it is rotating at high speed. balance.

Aike Machinery has absorbed domestic and foreign research results and created the technology that intellectual property belongs to our company. It solves the problem of anti-mixing key technology and strong threshing ability, high breaking rate, high cleaning rate but high total loss rate. For related questions, please feel free to call us.


As relatively common breeding machinery and equipment, the Corn Stalks Cutter Silage Grass Chopper Machine is a kind of common farming machinery. It has a variety of functions. Since the price of Grass Chopper Machine has been rising, daily maintenance of silage chopper is also needed. Note, let's take a look at it together.

China Corn Stalks Cutter Silage Grass Chopper Machine maintenance and repair measures:

1. According to the instruction manual, it is the key to install each component properly;

2. It is operated by technicians who have undergone professional training and are familiar with equipment operation, fault detection, and simple maintenance;

3. In the process of mechanical operation, check whether there are abnormal noises or other faults in time, and find that the faults are timely shut down for maintenance;

4. After the harvest season, relax the belt and spring of each part, the belt should be removed and stored in the warehouse; clean all parts of the dust, oil, paint the parts and remove the transfer chain of each part, clean and soak the oil Put into stock

5. Fill the corn straw-cutting machine with silage chopper machine bearings and other parts that need lubrication to prevent rust and affect the service life;

6. Cover the canvas in a small green storage machine in a dry and ventilated place to prevent rain.

Daily maintenance and maintenance of the Corn Stalks Cutter Silage Grass Chopper Machine, in the future use of silage chopper machine, can be better for everyone.


Pages: 1 2 3 »

Bitcoin economics has not changed

YOU DON'T HAVE TO BUY A WHOLE BTC BITCOIN! Each bitcoin is equal to 100 million Satoshis, making a Satoshi the smallest unit of bitcoin currently recorded on the blockchain. Think of the Satoshi as the “cents” part of bitcoin. But unlike a penny that represents 0.01 USD, Satoshi represents roughly 0.00000001 BTC — or bitcoin to its eighth decimal.

Bitcoin forecast to 2029

Time model tends to forecast lower bound to prices. Stock-to-Flow model is a better model, click chart above to see details. It incorporates the halvings and better represents the monetary policy of Bitcoin. Hype cycles are expected around each halving as investors anticipate the price appreciation. Bitcoin has a fixed supply (maximum 21 million Bitcoins), therefore it cannot be devalued by central bank money printing (so called Quantitative Easing, QE). Bitcoin is also decentralised, meaning no single authority can control it. It has existed on the Internet for 10 years from 2009. It will be the money of the machines and Internet. Also described as digital gold due to its scarcity and high value.

This is a good short article that explains, why Bitcoin? Why Bitcoin?

The Stock-to-Flow Bitcoin charts above are referenced from https://twitter.com/100trillionUSD

Dynamic stock and flow diagram, click for explanation on Wikipedia

HELP KEEP ADVERTISING FREE! The search engines, Google, Bing, etc. who make money from advertising, refuse to give a fair listing and ranking to this site. This is a form of censorship and unfair business practice by those large corporations who control the gateways to the Internet for their profit. If you want free advertising and believe in an open Internet for everyone, you can help to spread the word by sharing Mysittingbourne.co.uk on social media. You will benefit by increasing the number of people who see your messages!

Be Your Own Bank
Bitcoin (BTC) is the people's money, owned by the people for the people. Not by a bank or country. What are you waiting for?

It gives you control of your money (individual sovereignty). Preserve your savings; they will increase in value over time. Easily send money anywhere. Government's can't take it! What are you waiting for? Get a free Bitcoin wallet today or, run your own full node.

If you do not know where to start, install a Mycelium or, Electrum wallet.

Jameson Lopp video explaining advantages of running your own Bitcoin Full Node, click here

Jimmy Song video explaining advantages of running your own Bitcoin Full Node, click here

Run your own Full Node and help the Bitcoin (BTC) network. Be Your Own Bank! There are currently (May 2018) about 138,000 full nodes globally. About 10,000 of these are listening for outside connections on the P2P network.

As people suddenly realise they don’t own their data on Facebook, how will they react when they realise they don't own the money in their bank accounts either?

The good news is government can't take your Bitcoin in your own full node. Not by legalised theft (inflation), nor by government bail ins. Realise that fiat money, $, €, ¥, £, yuan, Venezuelan Bolívar, Argentine Peso, Zimbabwean Dollar, etc. is crashing! In the last 100 years, all fiat currencies have lost 97-99% of their purchasing power, reducing your standard of living.


What is a Full Node?

Download Bitcoin Core

Instructions for running your Full Node of Bitcoin Core

Instructions for running your Bitcoin Full Node under Tor for anonymity, privacy and security of your money in your own bank.

With a Full Node behind the Tor network, your Full Node is difficult to trace.

You also can use a VPN for encryption of your Bitcoin transactions (can be used with or without Tor).

For VPN, the PCMAG Editor's Choice is NordVPN, click here.NordVPN

With a Bitcoin Full Node protected by VPN and / or Tor, you have complete control of your own private electronic bank. Anonymous like cash, but electronic, instant, unlimited by space time and appreciating in value.

Live map showing reachable nodes in listening mode on the Bitcoin network. Add yours to the map!

Video explaining The Halving (Litecoin/Bitcoin). Another reason why Bitcoin and Litecoin prices will increase significantly!
Keybase chat crypto for everyone download now
Advertise here
Bitcoin transactions in real time, live from the blockchain:

For an imaginative audio visualisation of the Bitcoin blockchain from www.bitlisten.com, see bottom of Mysittingbourne home page here. The base sound announces the creation of another block. A block is like a page in a book or ledger. Unlike a database that can be altered, it is a permanent, incorruptible record of value transactions on the blockchain. Pure mathematical truth!

Bitcoin digital gold

As more and more people are turning to physical gold, so they are turning to Bitcoin digital gold.

Bitcoin is trustless and decentralised. Like gold, it has limited supply. It can never be over-printed and devalued by a government. You can transfer funds anywhere, almost instantaneously and at much lower cost than bank transfer.

Don't have a bank account? Want to spend your Bitcoin anywhere that accepts bank cards? Want to use an ATM to access your Bitcoin in local currencies? No problem! Spend your Bitcoin with a Visa debit card accepted almost anywhere.
Click here and sign up for your Bitcoin Visa debit card from SpectroCoin.

The SpectroCoin debit card is recommended by WeUseCoins. Click here to see their comparison of Bitcoin debit cards.

If you do not know about Bitcoin, a good place to start is by getting a free wallet from Coinbase.com,
Blockchain.info, or Copay.io.

bitcoin price chart

Physical Gold


Protect yourself and family from central bank currency debasement and inflation in asset prices, housing, food. There are rising levels of financial, economic and geopolitical risk in the world. In the last 100 years, all currencies have lost 97-99% of their purchasing power. Some believe that the final move to zero will take place in the next few years.

Currency debasement through money printing is the destruction of fiat money purchasing power - $, €, ¥, £, yuan, Venezuelan Bolívar, Argentine Peso, Zimbabwean Dollar...

True inflation and cost of living is currently 8% higher than the government reports. Real wages are falling rapidly and most people are taking out more and more debt to make ends meet. Only the wealthy minority and banks benefit from the current system.

Protect yourself. Buy physical, allocated gold, silver, platinum online and store it in safe vaults outside your jurisdiction (Switzerland, UK, USA, Canada and Singapore) or, at home. Physical gold has limited supply. Buy before the panic!

Look what happened in Cyprus (2013), Greece (2015) and Spain (Catalonia 2017). The lesson is that the money in your bank account is not really yours. It can be taken or frozen by the government just when you need it. Maybe it is not a good idea to keep too much money in the bank, especially when the next financial crisis comes!


BullionVault is the world's largest online investment gold service taking care of $2 billion for more than 65,000 users. Even small amounts of metal can be bought and they have the lowest costs.

Click here BullionVault